Nortel Networks 4400 Manual Do Utilizador
46 Chapter 5 Accessing the CLI and Basic Configuration
209664-A
5
Set the following communication parameters for the terminal:
6
Logging into the CLI Using the Terminal Emulation
Program
Program
1
Access the terminal emulation program you set up for this connection. A
blank window opens.
blank window opens.
2
Press [Enter] until you see a
Login
prompt.
3
At the
Login
prompt, type cli and press [Enter]. A
Password
prompt is
displayed.
4
Press [Enter]. You are now logged into the CLI and ready to initially
configure and assign an IP address to your Passport 4460 unit.
configure and assign an IP address to your Passport 4460 unit.
Continue on to
.
Data Rate
9600 bps
Data Bits
8
Stop Bits
1
Parity
None
Flow control
Xon/Xoff
Note:
If you are unable to connect to the Passport 4460, try selecting
Hardware in the flow control field.