Paradyne CSU Manual Do Utilizador
B. SNMP MIBs and Traps, and RMON Alarm Defaults
9128-A2-GB20-80
September 2002
B-13
Traps: enterprise-Specific
These traps indicate that an enterprise-specific event has occurred. Supported
enterprise-specific traps are listed below.
enterprise-specific traps are listed below.
Table B-7.
enterprise-Specific Traps and Variable-Bindings (1 of 3)
Trap
Variable-Bindings
Possible Cause
enterpriseCIR-
Change(15)
Change(15)
devFrExtDlciIfIndex
(devFrExt.mib)
(devFrExt.mib)
devFrExtDlciDlci
(devFrExt.mib)
(devFrExt.mib)
devFrExtDlciCIR
(devFrExt.mib)
(devFrExt.mib)
devLastTrapString
(devHealthAndStatus.-
(devHealthAndStatus.-
mib)
CIR has changed due to the LMI
report. LMI Protocol is set to
Standard and the network’s CIR
changed.
report. LMI Protocol is set to
Standard and the network’s CIR
changed.
String:
‘CIR on $ifString changed to
$CIR bps.’
‘CIR on $ifString changed to
$CIR bps.’
enterpriseConfig-
Change(6)
Change(6)
devLastTrapString
(devHealthAndStatus.-
mib)
(devHealthAndStatus.-
mib)
Configuration has been changed
via the menu-driven user
interface, an SNMP Manager, or
auto-configuration after
60 seconds has elapsed without
another change.
via the menu-driven user
interface, an SNMP Manager, or
auto-configuration after
60 seconds has elapsed without
another change.
String:
‘Device configuration change.’
‘Device configuration change.’
enterpriseDLCI-
delete (17)
delete (17)
devFrExtDlciIfIndex
(devFrExt.mib)
(devFrExt.mib)
devFrExtDlciDlci
(devFrExt.mib)
(devFrExt.mib)
devLastTrapString
(devHealthAndStatus.-
mib.)
(devHealthAndStatus.-
mib.)
The DLCI has been deleted. The
network no longer supports the
DLCI, and it was removed.
network no longer supports the
DLCI, and it was removed.
Strings:
‘$ifString deleted by Auto-DLCI
delete.’’
‘$ifString deleted by Auto-DLCI
delete.’’
enterpriseDLCI-
Down(11)
Down(11)
DLCI Status is set to Inactive; the
DLCI is down.
DLCI is down.
Strings:
‘$ifString down.’ (Due to LMI or
physical failure.)
‘$ifString down.’ (Due to LMI or
physical failure.)
‘$ifString administratively
shutdown.’ (Due to an intentional
shutdown.)
shutdown.’ (Due to an intentional
shutdown.)
enterpriseDLCIUp(12)
DLCI Status is set to Active; DLCI
is up again.
is up again.
String:
‘$ifString up.’
‘$ifString up.’
enterpriseLatency-
Exceeded(21)
Exceeded(21)
ifIndex (RFC 1573)
devLastTrapString
(devHealthAndStatus.-
mib
(devHealthAndStatus.-
mib
An IP SLV latency threshold has
been exceeded for a particular
Class of Service for a path.
been exceeded for a particular
Class of Service for a path.
String:
‘Latency exceeded
xxx.xxx.xxx.xxx, COS nn,
DLCI
‘Latency exceeded
xxx.xxx.xxx.xxx, COS nn,
DLCI
nnnn’