Epson EMP 765 Manual Do Utilizador
100
Maintenance
User’s Guide
Replacing Consumables
This section describes how to replace the lamp and the air filters.
It is time to replace the lamp when:
• The message "Replace the Lamp." appears on the screen when
projection starts.
.
• When the Lamp indicator is flashing orange.
• The projected image gets darker or starts to deteriorate.
Lamp Replacement Period
A message will be displayed.
Flashing orange
TIP
• The lamp replacement message is set to appear after the following
periods of time in order to maintain the initial brightness and quality
of the projected images.
· When used continuously at high brightness: Approx. 1900 hours
· When used continuously at low brightness : Approx. 2900 hours
"Brightness Control" s
of the projected images.
· When used continuously at high brightness: Approx. 1900 hours
· When used continuously at low brightness : Approx. 2900 hours
"Brightness Control" s
• If you continue to use the lamp after this period, the possibility of the
lamp breaking becomes greater. When the lamp replacement
message appears, replace the lamp with a new one as soon as
possible, even if it is still working.
message appears, replace the lamp with a new one as soon as
possible, even if it is still working.
• Depending on the characteristics of the lamp and on the way it has
been used, the lamp may become darker or stop working before the
lamp warning message appears. You should always have a spare
lamp ready in case it is needed.
lamp warning message appears. You should always have a spare
lamp ready in case it is needed.
• Contact your dealer for a spare lamp.