3com 3C16405 Manual Do Utilizador
DUA1640-5AAA02
7-12
C
HAPTER
7: M
ANAGEMENT
U
SING
THE
W
EB
I
NTERFACE
Management
Address
This page specifies a unique IP address for the stack, as shown in
Figure 7-8.
Figure 7-8.
If you have no previous knowledge of IP, refer to “IP Addresses” on
page 5-7. If you change any of these values, you may need to re-access
the hub using the new values.
page 5-7. If you change any of these values, you may need to re-access
the hub using the new values.
Figure 7-8 Management Address Page
The fields are:
IP Address Provides a box for you to type the IP address of the stack.
Network Mask Provides a box for you to type the subnet mask for the
IP address.
IP address.
Default Router Provides a box for you to type the IP address of the
default router (if you have one) which is used by the stack to
communicate with other networks.
default router (if you have one) which is used by the stack to
communicate with other networks.
BOOTP Disabled / Enabled
Specifies whether you want your BOOTP server (if you have one) to
automatically allocate the stack an IP address and subnet mask.
Specifies whether you want your BOOTP server (if you have one) to
automatically allocate the stack an IP address and subnet mask.