Tascam DM-24 Manual Do Utilizador

Mute and fader groups are displayed also slightly dif-
ferently on account of the reduced number of chan-
nels, as shown here:

The mute grouping is shown here, but the fader 
grouping is almost identical.

When the change is made between high sampling 
frequency and normal sampling frequency modes, 
the console reverts to “neutral settings” and the cur-
rent groupings are no longer valid.

For details of how to operate these facilities, see 
“Grouping” on page 69.

The trim screen shows 16 channels, and the delay 
screen shows 12 channels, rather than 32.

Also, note that the range for delay times remains the 
same, even though the sampling frequency is 
different.

Because of the different configuration of the DM-24 
in normal and high sampling frequency modes, it is 
not possible to use a normal frequency snapshot in 
high sampling frequency mode, or the other way 
round.

Snapshot library entries are marked with an 

Hs

 (high 

sampling) or 

Ns

 (normal sampling) beside their 

names in the list of library entries on the library 
screen.

An appropriate popup message is displayed if an 
attempt is made to load a different kind of snapshot 
library entry, and the load fails.

However, note that it is possible to store dynamics 
processor, effects and equalization library entries in 
one sampling frequency mode, and recall them for 
use in the other mode.