Tascam DM-24 Manual Do Utilizador

Página de 146
10 – Monitoring—Meters and faders
78 
TASCAM DM-24 Reference Manual
24 channels or a screen with channels 25 through 32, 
aux sends 1 through 6 and busses 1 through 8:
The 
SEL Key Follows Fader Layer
 allows the setup of the 
automatic linking of the selected channel to the 
selected meter layer.
When this option is selected, if a channel is selected, 
the fader layer is changed, and then the fader layer is 
changed back again, the originally-selected channel 
is automatically selected. 
For example, if this option is active, and 
SEL
 2 key is 
lit with fader layer 1-16 active, fader layer 17-32 is 
then selected, 
SEL
 key 3 (channel 19) is selected, and 
then fader layer 1-16 is then re-selected, 
SEL
 key 2 
will be active.
If the option is not active, any 
SEL
 key which is lit 
remains lit when the fader layer is changed. For 
example, if this option is not selected, and 
SEL
 key 2 
is lit with fader layer 1-16 active, and fader layer 17-
24 is then selected, 
SEL
 key 2 will still be lit (that is, 
channel 18).
When the
 Meter Follows SEL key 
option is checked, the 
meter layer automatically changes when an appropri-
ate 
SEL
 key is pressed. The modes are as follows:
NOTE
If the FADER->METER Follow option is checked, and the 
SEL Key Follows Fader Layer is not checked, the meter 
follow option will not be enabled. 
These settings can also be made in the OPTION 
PREFERENCES sub-screen (“PREFERENCES” on page 21).
Master meters
As well as the option described immediately above, 
pressing soft key 3 in the 
METER/FADER
 display pro-
vides a view of the master meters and faders as 
shown here:
The 
METERING POINT
 can be set (
ENTER
 key, dial and 
ENTER
 key) in the same ways as described earlier 
(here the options are described as 
PRE (pre-fader)
POST 
(post-fader) and 
INPUT
 (input)). Changes made 
here are reflected in the 
METER
 screen and vice versa.
Use the 
SEL
 or cursor keys to move the box cursor 
around the screen in groups of 4 modules, and the 
PODs to set the fader values.
Fader layer
SEL keys
Meter layer
CH 1–16
CH 1–16
CH 1–24
CH 17–32
CH 17–24
CH 1–24
CH 25–32
MASTER/CH 25–32
MASTER
Buss 1–8/Aux1–6/Stereo MASTER/CH 25–32