Sony KDL-32S2530 Guia Do Utilizador

 GB

KDL-46/40/32S2510

2-670-908-

(1)

You can select the options listed below on the Picture 
menu. To select options in “Settings”, see “Navigating 
through menus” (page 19).

Selects whether to apply settings made in the Picture menu to all inputs, or only to 
the input currently being watched.
“All”: Applies settings to all inputs.
“Viewing Only”: Applies settings only to the current input.

Selects the picture mode.
“Vivid”: For enhanced picture contrast and sharpness.
“Standard”: For standard picture. Recommended for home entertainment.
“Custom”: Allows you to store your preferred settings.

Resets all picture settings except “Picture Mode” to the factory settings.

Adjusts the brightness of the backlight.

"Backlight" is not available when you set "Power Saving" to "High" (page 26).

Increases or decreases picture contrast.

Brightens or darkens the picture.

Increases or decreases colour intensity.

Increases or decreases the green tones.

“Hue” can only be adjusted for an NTSC colour signal (e.g., U.S.A. video tapes).

Adjusts the whiteness of the picture.
“Cool”: Gives the white colours a blue tint.
“Neutral”: Gives the white colours a neutral tint.
“Warm1”/“Warm2”: Gives the white colours a red tint. “Warm2” gives a redder tint 
than “Warm1”.

“Warm1” and “Warm2” can only be selected when you set “Picture Mode” to “Custom”.

010COV.book  Page 20  Monday, November 13, 2006  12:33 PM