Ricoh SP 3300D Manual Do Utilizador

Installing Printer Software in Windows

9

: After setup is complete, if your printer driver doesn’t work 

properly, reinstall the printer driver. See “Reinstalling Printer 
Software” on page 9.

You can reinstall the software if installation fails.

Start Windows.

From the Start menu select Programs or All Programs 

→ 

→ Maintenance.

Select Repair and click 

Next.

The list of printers available on the network appears. Select the 
printer you want to install from the list and then click Next. 

• If you do not see your printer on the list, click Update to 

refresh the list, or select Add TCP/IP Port to add your printer 
to the network. To add the printer to the network, enter the 
port name and the IP address for the printer.

• To find a shared network printer (UNC Path), select Shared 

Printer [UNC] and enter the shared name manually or find a 
shared printer by clicking the Browse button.

You will see a component list so that you can reinstall any item 
individually.

: If your printer is not already connected to the computer, the 

following window will appear.

• After connecting the printer, click Next.
• If you don’t want to connect the printer at this time, click Next, and 

No on the following screen. Then the installation will start and a 
test page will not be printed at the end of the installation.

Select the components you want to reinstall and click 

Next.

If you installed the printer software for local printing and you 
select SP 3300 Series, the window asking you to print a test 
page appears. Do as follows:

a. To print a test page, select the check box and click 

Next.

b. If the test page prints out correctly, click Yes.

If it doesn’t, click No to reprint it.

When the reinstallation is done, click Finish.