Viewsonic PJ750 Guia Do Utilizador

ViewSonic  PJ750

Using the SCREEN menu, the five items shown in the Table below 

can be performed. Please perform each operation according to the 

instructions in the Table.

MyScreen

ORIGI-

NAL
The BLANK Screen may be voluntarily selected. The BLANK Screen is displayed when the screen 

has been erased (i.e., made to vanish) by manipulating the BLANK button (please refer to the “Tem-

porarily Blanking the Screen” section on page 20.
MyScreen: Using the MyScreen category (see page 27), one can register a desired screen (or 

screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).
Option screens: Various colored non-patterned (plain) screens displayed within the Menus.
The MyScreen and the ORIGINAL Screen will each change to a non-patterned (plain) black color 

screen several minutes after being displayed.

MyScreen 

 ORIGINAL 

 TURN OFF

The START UP Screen may be voluntarily selected. The START UP Screen is displayed when no 

signal has been inputted, or when spec signals are being inputted.
MyScreen: Using the MyScreen category (see page 27), one can register a desired screen (or 

screens). At the time of factory shipment, this is set as a non-patterned (plain) blue color screen.
ORIGINAL: Existing standard screens. Please make confirmation using the actual screen(s).
TURN OFF: A non-patterned (plain) blue color screen.
The MyScreen and the ORIGINAL Screen will each change to the BLANK Screen several minutes 

after being displayed.

Registration of MyScreen:
When this item is executed, the MyScreen Menu for registration of MyScreen for the BLANK Screen 

and the START UP Screen is displayed. When operations are performed in accordance with this 

Menu, one can “cut” and register desired screens from among the received images within the dis-

play.
After the “Do you start capturing this picture?” message has been displayed, pressing the ESC (or 

RESET) button interrupts execution of the MyScreen. When the ENTER button is pressed, the pic-

ture becomes static (no longer moves), and a frame for picture cutting, as well as the message that 

follows below, appear. Please press the button when the screen you want to register is currently 

being displayed.
When the “Move the capture area as you want.” message has been displayed, pressing the ESC (or 

RESET) button will eliminate the statbutyta

t

 buttons.(After.)]TJ0 -112.66 TD0.0005 Tc0.0001 Tw[ designtsing the screen you want to registerd, pressing the ENTER button williniticatpctreer registr-