ZyXEL P-660HW-D1 Guia Do Utilizador

Prestige 660H/HW Series User’s Guide

259 

Chapter 26 Remote Node Configuration

Figure 147   Menu 11.8 Advance Setup Options

              Menu 11.8 - Advance Setup Options

          PPPoE pass-through= No

          Press ENTER to Confirm or ESC to Cancel:

The following table describes the fields in this menu.

Table 86   Menu 11.8 Advance Setup Options

PPPoE pass-through

Press [SPACE BAR] to select Yes and press [ENTER] to enable PPPoE pass 

through. In addition to the Prestige's built-in PPPoE client, you can enable 

PPPoE pass through to allow up to ten hosts on the LAN to use PPPoE client 

software on their computers to connect to the ISP via the Prestige. Each host 

can have a separate account and a public WAN IP address. 
PPPoE pass through is an alternative to NAT for applications where NAT is 

not appropriate.
Press [SPACE BAR] to select No and press [ENTER] to disable PPPoE pass 

through if you do not need to allow hosts on the LAN to use PPPoE client 

software on their computers to connect to the ISP.

When you have completed this menu, press [ENTER] at the prompt “

Press ENTER to Confirm 

or ESC to Cancel:

”  to save your configuration, or press [ESC] at any time to cancel.