ZyXEL P-660HW-D1 Guia Do Utilizador

Table 90   Applying NAT in Menus 4 & 11.3

NAT

Press [SPACE BAR] and then [ENTER] to select Full Feature if you have multiple public 

WAN IP addresses for your Prestige.  The SMT uses the address mapping set that you 

configure and enter in the Address Mapping Set field (see

). 

Select None to disable NAT.

When you select SUA Only, the SMT uses Address Mapping Set 255 (see

). Choose SUA Only if you have just one public WAN IP address for your 

Prestige.

Prestige 660H/HW Series User’s Guide

Chapter 29 Network Address Translation (NAT)

270

Use the address mapping sets menus and submenus to create the mapping table used to assign 
global addresses to computers on the LAN. Set 255 is used for SUA. When you select Full 
Feature in menu 4 or 11.3, the SMT will use Set 1. When you select SUA Only, the SMT 
will use the pre-configured Set 255 (read only).

The server set is a list of LAN servers mapped to external ports. To use this set, a server rule 
must be set up inside the NAT address mapping set. Please see 

 for 

further information on these menus. To configure NAT, enter 15 from the main menu to bring 
up the following screen. 

Figure 157    Menu 15 NAT Setup 

Menu 15 - NAT Setup

      1. Address Mapping Sets

      2. NAT Server Sets

Enter Menu Selection Number:

Enter 1 to bring up Menu 15.1 — Address Mapping Sets.