ZyXEL P-660HW-D1 Guia Do Utilizador

Prestige 660H/HW Series User’s Guide

347 

Chapter 38 IP Policy Routing

Figure 228   Menu 3.2 TCP/IP and DHCP Ethernet Setup

Menu 3.2 - TCP/IP and DHCP Setup

        DHCP Setup
          DHCP= Server
          Client IP Pool Starting Address= 192.168.1.33
          Size of Client IP Pool= 32
          Primary DNS Server= 0.0.0.0
          Secondary DNS Server= 0.0.0.0
          Remote DHCP Server= N/A
        TCP/IP Setup:
          IP Address= 192.168.1.1
          IP Subnet Mask= 255.255.255.0
          RIP Direction= Both
            Version= RIP-1
          Multicast= None
          IP Policies=
          Edit IP Alias= No

Press ENTER to Confirm or ESC to Cancel:

Go to menu 11.3 (shown next) and type the number(s) of the IP Routing Policy set(s) as 
appropriate. You can cascade up to four policy sets by typing their numbers separated by 
commas.

Figure 229   Menu 11.3 Remote Node Network Layer Options

Menu 11.3 - Remote Node Network Layer Options

  IP Options:                        Bridge Options:
    IP Address Assignment= Static      Ethernet Addr Timeout (min)= 0
    Rem IP Addr: 0.0.0.0              
    Rem Subnet Mask= 0.0.0.0  
    My WAN Addr= 0.0.0.0             
    NAT= Full Feature
      Address Mapping Set= 2
    Metric= 2
    Private= No
    RIP Direction= Both             
      Version= RIP-2B                 
    Multicast= IGMP-v2
    IP Policies= 

Press ENTER to Confirm or ESC to Cancel:

If a network has both Internet and remote node connections, you can route Web packets to the 
Internet using one policy and route FTP packets to a remote network using another policy. See 
the next figure.