ZyXEL P-660HW-D1 Guia Do Utilizador

Prestige 660H/HW Series User’s Guide

Chapter 7 Wireless LAN (Prestige 660HW)

92

Figure 30   Wireless LAN: 802.1x/WPA: No Authentication

The following table describes the label in these screens.

Table 18   Wireless LAN: 802.1x/WPA: No Access/Authentication 

Wireless Port 

Control

To control wireless station access to the wired network, select a control method from 

the drop-down list box. Choose from No Access Allowed, No Authentication 

Required and Authentication Required. 
No Access Allowed blocks all wireless stations access to the wired network.
No Authentication Required allows all wireless stations access to the wired network 

without entering usernames and passwords. This is the default setting. 
Authentication Required means that all wireless stations have to enter usernames 

and passwords before access to the wired network is allowed. 
Select Authentication Required to configure Key Management Protocol and other 

related fields. 

Back

Click Back to go to the main wireless LAN setup screen. 

Apply

Click Apply to save your changes back to the Prestige. 

Cancel

Click Cancel to begin configuring this screen afresh.

You need the following for IEEE 802.1x authentication.

• A computer with an IEEE 802.11 a/b/g wireless LAN adapter and equipped with a web 

browser (with JavaScript enabled) and/or Telnet.

• A wireless station computer must be running IEEE 802.1x-compliant software. Not all 

Windows operating systems support IEEE 802.1x (see the Microsoft web site for details). 
For other operating systems, see their documentation. If your operating system does not 
support IEEE 802.1x, then you may need to install IEEE 802.1x client software.

• An optional network RADIUS server for remote user authentication and accounting.

Select Authentication Required in the Wireless Port Control field and 802.1x in the Key 
Management Protocol field to display the next screen.