ZyXEL G-360 Guia De Configuração Rápida

ZyXEL G-360 Quick Start Guide 

7 

LED PWR is off 
when inserting the 
ZyXEL G-360 into 
the PCI slot. 

Make sure the ZyXEL G-360 is properly inserted. 
Try to Insert the ZyXEL G-360 again.   

LED LINK is off 
when the LED 
PWR is on. 

Please check and make sure your AP/Router is up and running.  
Make sure you are in the coverage of the AP/Router you connect 
to. 

 

 

Make sure the ZyXEL G-360 is inserted into the computer PCI 
slot properly and then restart your computer. Check the LEDs on 
the ZyXEL G-360. 

Perform a hardware scan by clicking Start, Settings, Control 
Panel and double-clicking Add/Remove Hardware. (Steps may 
vary depending on the version of Windows).  
Follow the on-screen instructions to search for the ZyXEL G-360 
and install the driver. 

Check for possible hardware conflicts. In Windows, click Start, 
Settings, Control Panel, System, Hardware and then click 
Device Manager. Verify the status of the ZyXEL G-360 under 
Network Adapter. (Steps may vary depending on the version of 
Windows). 

Windows does not 
auto-detect the 
ZyXEL G-360.  

Install the ZyXEL G-360 in another computer. If the error 
persists, you may have a hardware problem. In this case, you 
should contact your local vendor. 

Please see your User’s Guide for more Troubleshooting details.