Allied Telesis 16fi Instrução De Instalação

C613-04017-01 REV J

1.   DC models of the Rapier Switch do not have an RPS connector and the RPS LED will not function.
2.   Not included on the Rapier 48, G6, G6F-SX/SC, G6F-LX/SC, or G6F-SX/MT-RJ.
3.   Hot swapping is supported by Software Version 2.3.1 or later. AT-AR021 (S) BRI-S/T, AT-AR021 (U) 

BRI-U, and AT-AR023 SYN PICs can be hot swapped.

The Rapier Switch Hardware Reference has further troubleshooting information, 
including information on Switch Port and Uplink Module LEDs.

The Documentation and Tools CD-ROM bundled with each Rapier Switch 
contains the complete Documentation Set for your switch and its expansion 
options, as well as tools for managing the switch. This includes:

■

The Rapier Switch Statutory and Safety booklet, which provides safety and 
statutory information for the Rapier Switch and its expansion options.

■

The Rapier Switch Hardware Reference, which provides detailed information 
on the hardware features of Rapier Switches.

■

This Quick Install Guide.

■

The Rapier Switch Software Reference, which provides detailed information 
on configuring the switch and its software.

■

The Network Service Module Quick Install Guide, which outlines the 
procedure for installing an NSM; and the Network Service Module Hardware 
Reference, which provides detailed information on NSMs.

■

The Port Interface Card Quick Install Guide, which outlines the procedure for 
installing PICs; and the Port Interface Card Hardware Reference, which 
provides detailed information on PICs.

■

The Uplink Module Quick Install Guide, which outlines the procedure for 
installing an Uplink Module; and the Uplink Module Hardware Reference, 
which provides detailed information on Uplink Modules.

■

AT-TFTP Server for Windows for downloading software releases.

■

Adobe Acrobat Reader for viewing online documentation.

RPS

1

 (Redundant 

Power Supply)

Green

An RPS is connected to the switch

In use

2

 (Rear panel)

Green

An NSM is installed, is receiving power, and is 
operational. The NSM and its PICs are not 
ready to be hot swapped

Off

No NSM is installed, or the NSM is not installed 
correctly (the switch unit has not recognised 
the NSM)

Swap

2 

(Rear panel)

Green

The NSM and its PICs are ready to be hot 
swapped

Off

The Hot Swap button must be pressed before 
the NSM or PICs can be hot swapped, or the 
software version does not support hot 
swapping

3