NEC NP300 Guia Do Utilizador
5
2. Installation and Connections
Connecting the Supplied Power Cable
Connect the supplied power cable to the projector.
First connect the supplied power cable’s two-pin plug to the AC IN of the projector, and then connect the other plug
of the supplied power cable in the wall outlet.
First connect the supplied power cable’s two-pin plug to the AC IN of the projector, and then connect the other plug
of the supplied power cable in the wall outlet.
CAUTION:
Do not try to touch the ventilation outlet on the left front (when seen from the front) as it can become heated while
the projector is turned on and immediately after the projector is turned off.
the projector is turned on and immediately after the projector is turned off.
SEL
ECT
MEN
U
EXIT
EN
TER
STA
TUS
LAM
P
AUT
OAD
J.
SOU
RCE
FOC
US
STATUS
LAMP
AUTO ADJ.
SOURCE
Make sure that the prongs are fully inserted into both
the AC IN and the wall outlet.
the AC IN and the wall outlet.
To wall outlet
←