Hoshizaki FH1-SSB(-HD) Guia Do Utilizador

0

1. This unit should be disassembled or repaired only by a qualified service 

technician to reduce the risk of injury, electric shock, or fire.

. Do not make any alterations to the unit. This could cause water leak, electric 

shock, or fire.

3. To reduce the risk of electric shock, do not touch the attachment plug or 

power switch with damp hands.

4. In case of insufficient refrigeration performance, move the stored food 

product into another unit to prevent its deterioration.

If an error occurs, the alarm code and cabinet temperature are displayed in -second 
intervals and an alarm sounds. When an error occurs, check the error code and follow 
the instructions below. 

E1

3 beeps 

every ten 

seconds

High Temperature Alarm 
 
Cabinet temperature has exceeded the 
setpoint temperature by 10°F (5.6°C) for 
more than  hours.

Press "RESET."  
If the temperature has returned to the 
setpoint range, the alarm will be silenced 
and "E1" will clear. 
If the temperature has not returned to the 
setpoint range, the alarm will be silenced 
for 5 minutes and "E1" will continue to 
flash.

If obvious corrections such as closing 
doors and cleaning the air filter and/or 
condenser do not bring temperature 
back in range, call a qualified service 
technician.

E

4 beeps 

every ten 

seconds

Low Temperature Alarm 
 
Cabinet temperature has remained below 
the setpoint temperature by 8°F (4.4°C) 
for more than 1 hour.

Press "RESET." 
If the temperature has returned to the 
setpoint range, the alarm will be silenced 
and "E" will clear. 
If the temperature has not returned to the 
setpoint range, the alarm will be silenced 
for 5 minutes and "E" will continue to 
flash. 

If obvious corrections do not bring 
the temperature back in range, call a 
qualified service technician.