Alesis guitarfx Manual De Referência

When you switch programs, the GuitarFX normally changes 
immediately to the program shown on the display. However, 

in some situations—especially when playing live—you may 
want the ability to scroll through program numbers while 
remaining in the current program setting. For example, let’s 
say you’re soloing in program A3, which gives you strong 

distortion and fat chorus. If you want to scroll up to program 
C6 for a clean rhythm sound while you continue playing, 
you’ll have to be in deferred program-change mode, which 
allows you to defer a program change until you confirm it. 

Here’s how: 
 

1. 

As you turn on the GuitarFX, hold down either foot 

pedal. Letters will scroll by on the display, spelling the 

word “deferred.”  

2. 

While in PLAY mode, step on one of the foot pedals or 

turn the VALUE knob to change the program number. 
You’ll notice that the GuitarFX remains in the program 
it was in before you changed the program value. Also, 
the display will flash the digit that is different from the 

currently selected program. For example, if you are 
playing in program D5 and scroll up to program D7, 
the 7 will flash. If you scroll up to F2, both digits will 
flash. 

3. 

Once the display shows the program number you desire, 
step on both foot pedals at the same time 

 to 

confirm the program change. The display will stop 
flashing and the GuitarFX will switch to the new 

program. 

4. 

To return to normal program-change mode, turn off 

the GuitarFX and turn it back on without holding 
down either foot pedal.