Hoover f5505 Cartão De Referência Rápida
Quick Reference
Guide
59188-359
®
SEE OWNER’S MANUAL FOR COMPLETE INSTRUCTIONS
Congratulations on your new purchase of the Hoover® SteamVac™ Spot™ cleaner.
It was designed with one thing in mind - to make deep cleaning your carpets as quick
and easy as vacuuming. So you can get back on your carpets, and back to life sooner.
Keep this reference guide handy for quick information about the cleaner.
It was designed with one thing in mind - to make deep cleaning your carpets as quick
and easy as vacuuming. So you can get back on your carpets, and back to life sooner.
Keep this reference guide handy for quick information about the cleaner.
Product Features
Hand grip
Telescoping handle
Telescoping handle
collar
collar
Carry handle
Cord hooks
ON/OFF switch
Solution tank
Tool connector/
hose
hose
Nozzle
Recovery
tank
tank
Recovery tank
lid
lid
Float indicator
window
window
Upper handle
release button
release button
Solution trigger
Stair/upholstery
nozzle
nozzle
Handle release
pedal
pedal
Set Up
Preparation for
Cleaning
Cleaning
1. Vacuum carpet.
2. Test detergent for
colorfastness.
3. Pretreat spots, stains
and high traffic areas
with HOOVER Spot &
Stain Spray Cleaner.
with HOOVER Spot &
Stain Spray Cleaner.
4. Pull up on solution
tank handle and
remove tank.
remove tank.
5. Turn tank upside
down, remove cap and
pour detergent into
tank to fill line.
pour detergent into
tank to fill line.
Fill tank completely
with hot tap water.
with hot tap water.
6. Replace cap.
7. Place tank back onto
cleaner, pressing firm-
ly to be sure tank is
fully positioned.
ly to be sure tank is
fully positioned.
Clean Up
1. Clean carpet or
upholstery:
• Squeeze and hold
• Squeeze and hold
trigger. Slowly move
cleaner back and
forth.
cleaner back and
forth.
• Release trigger and
slowly go over the
same area to pick up
dirty solution.
same area to pick up
dirty solution.
• Tough spots and
stains may need
additional treatment
with Spot & Stain
additional treatment
with Spot & Stain
Spray Cleaner.
2. Listen! When the
motor sound rises in
pitch or changes, the
recovery tank needs to
be emptied. When the
recovery tank is full,
the cleaner will no
longer pick up dirty
solution.
pitch or changes, the
recovery tank needs to
be emptied. When the
recovery tank is full,
the cleaner will no
longer pick up dirty
solution.
3. While damp, apply
HOOVER Carpet &
Upholstery Protectant.
Upholstery Protectant.
4. Allow time for the
carpet or upholstery to
dry.
dry.
Maintenance
Clean the brushes
Unplug extractor from
electrical outlet.
1. Remove tanks to pre-
electrical outlet.
1. Remove tanks to pre-
vent possible leaks.
2. Tilt extractor back so
handle rests on floor.
3. Remove carpet fibers
or strings attached to
brushes.
brushes.
Storing your
extractor
1. Empty solution tank,
rinse thoroughly.
2. Replace empty tank on
extractor. Turn extractor
ON, squeeze trigger
and push extractor for-
ward and back several
times, picking up liquid
on floor.
ON, squeeze trigger
and push extractor for-
ward and back several
times, picking up liquid
on floor.
3. Empty recovery tank -
step on handle release
pedal and lower han-
dle. Lift up on tank
and pull off. Lift up on
tank lid latches and re-
move tank lid and
float. Rinse thoroughly
and air dry.
pedal and lower han-
dle. Lift up on tank
and pull off. Lift up on
tank lid latches and re-
move tank lid and
float. Rinse thoroughly
and air dry.
4. Allow brushes and
underside of extractor
to air dry thoroughly
before storing on car-
peted or wood surface.
to air dry thoroughly
before storing on car-
peted or wood surface.
5. Push up on handle
collar and lower tele-
scoping handle. Rotate
handle release knob
backwards to drop
upper handle into
storage position.
scoping handle. Rotate
handle release knob
backwards to drop
upper handle into
storage position.
SEE OWNER’S MANUAL FOR
COMPLETE INSTRUCTIONS
COMPLETE INSTRUCTIONS
1. UNFOLD HANDLE - Raise handle
from storage position until it locks in
place.
from storage position until it locks in
place.
2. Slide collar up on telescoping handle to
adjust handle to desired height.
adjust handle to desired height.