Lexmark 8300 Manual Do Utilizador

Click Printer.

Make sure no check mark appears next to Pause Printing.

Make sure a check mark does appear next to Set As Default.

Press Power to turn the printer off.

Disconnect the power supply cord from the wall outlet.

Gently remove the power supply from the printer.

Reconnect the power supply to the printer.

Plug the power supply cord into the wall outlet.

Press Power to turn the printer on.

If none of the previous options fixes the problem, uninstall the printer software, and reinstall it. For more
information, see “Removing and reinstalling the software” on page 125.

Enable PictBridge printing on the camera by selecting the correct USB mode. For more information, see
the digital camera documentation.

Disconnect the camera.

Connect a PictBridge-enabled digital camera to the PictBridge port. See the digital camera
documentation to determine whether it is PictBridge-enabled.

Use only the USB cable that came with the camera.

Remove the memory card or the flash drive from the printer.

If you are not satisfied with the print quality of a document, make sure you:

Use the appropriate paper for the document. Use Lexmark Premium Photo Paper if you are printing
photos or other high quality images.

Use a paper that is a heavier weight, bright white, or coated.

Select a higher print quality.