Sanyo PLC-WXU300 Guia Do Utilizador

 0

 0
Off
 0
 0

Select Digital zoom +. The On-Screen Menu disappears

and D . zoom + appears. Press the SELECT button to

expand the image size. Use the Point

▲▼◄►

buttons to pan

the image. The Panning function can work only when the

image is larger than the screen size.

A projected image can be also expanded by pressing the

D.ZOOM

+

button on the remote control.

To exit the Digital zoom +/– mode, press any button except

the D.ZOOM

+/-

buttons, SELECT and Point buttons.

Select Digital zoom -. The On-Screen Menu disappears

and D . zoom – appears. Press the SELECT button to

compress image size.

The projected image can be also compressed by pressing

the D.ZOOM

-

button on the remote control.

To return to the previous screen size, select a screen size

from the Screen Size Adjustment Menu or select an input

source from the Input Source Selection Menu (see pages

27-28) again or adjust the screen size with the D.ZOOM

+/-

buttons.

Note:
 • The panning function may not operate properly if

the stored Mode in the PC adjust Menu is used

(p.32).

• The minimum compression ratio is limited

depending on the input signal, when the

Keystone function is working or when the

custom is selected for the screen size.

 • True, Full and Digital zoom +/– cannot be

selected when 480i, 575i, 480p or 575p is

selected in the PC System Menu (p.29).

 • Digital zoom +/- cannot be selected when Full

or True is selected.

• When Custom is selected, the Digital zoom -

function is disabled.

Adjust the screen scale and position manually with this

function.

Press the Point ► button at Custom and the Custom is

displayed on the screen, you can use the Point ▲▼ buttons

to choose the item you want to adjust.
 Scale H/V ..........  Adjust the Horizontal/Vertical screen

scale.

 H&V ...................  When set to On, the aspect ratio is fixed.

appears dimmed and becomes

unavailable. Adjust Scale H, then the

screen scale is automatically modified

based on the aspect ratio.

 Position H/V .....  Adjust the Horizontal/Vertical screen

position.

 Common ...........  Save the adjusted scale to all the inputs.

Press the SELECT button at Common

to display a confirmation box. To save

the scale, press the SELECT button

at yes. When Custom is selected, the

saved scale is used.

 Reset .................  Reset the all adjusted values. Press

the SELECT button at Reset to display

a confirmation box. To reset, press the

SELECT button at yes.

Note:

 • When no signal is detected, Normal is set

automatically and the Aspect dialog box

disappears.

 • The adjustable range for Scale H/V and

is limited depending on the input

signal.