Sanyo PLC-XU111 Manual Do Proprietário

If a projected picture still has keystone distortion after
pressing the AUTO SETUP button on the top control or the
AUTO SET button on the remote control, correct the image
manually as follows:

Press the KEYSTONE button on the top control or on the
remote control. The Keystone dialog box appears. Use the
Point 

ed

buttons to correct keystone distortion. The

keystone adjustment can be stored (see page 48).

Auto setup function is provided to automatically correct
Keystone distortion according to the projector’s tilt and
adjust the computer display parameters (Fine sync, Total
dots, and Picture position) by just pressing the AUTO
SETUP button on the top control or the AUTO SET button
on the remote control. The operational setup for the Auto
setup can be changed in the Setting menu. Refer to page
47 for the setting of the Auto setup function. 

✔Notes:

Rotate the Zoom Ring to zoom in and out.  
Rotate the Focus Ring to adjust the focus of the image.  

Zoom Ring

Focus Ring

Reduce the upper width 
with the Point 

e

button. 

Reduce the lower width 
with the Point 

d

button.  

• The white arrows indicate that there is no

correction.

• A red arrow indicates the direction of correction.
• An arrow disappears at the maximum correction.
• If you press the KEYSTONE button on the top

control or on the remote control once more while
the keystone dialog box is being displayed, the
keystone adjustment will be canceled.

• The adjustable range can be limited depending on

the input signal.

ed 

ed