Sanyo PLC-XP200L Guia Do Utilizador

Select Digital zoom +. The On-Screen Menu disappears and “D. 

zoom +” appears. Press the SELECT button to expand the image 
size. Use the Point ed7 8 buttons to pan the image. The Panning 

function can work only when the image is larger than the screen 

size.

You can also enter the Digital zoom + mode by pressing the 

D.ZOOM button on the remote control.

Select Digital zoom –. The On-Screen Menu disappears and “D. 

Zoom –” appears. Press the SELECT button to compress the image 

size. 

You can also enter the Digital zoom – mode by pressing the 

D.ZOOM button on the remote control.

To exit the Digital Zoom +/– mode, press any button except the 

D.ZOOM , SELECT, and Point buttons.

This function is used to store or reset the keystone correction 
when the AC power cord is unplugged. Use the Point 7 8 buttons 

to switch between each option. 

  Store. . .  Keep the keystone correction even when the AC power 

cord is unplugged.

  Reset  . .  Release the keystone correction when the AC power 

cord is unplugged.

To correct keystone distortion, press the Select button. The 
Keystone dialog box appears. Use the Point ed7 8 buttons to 

correct keystone distortion. (p.33)

When this function is set to “On,” the picture is top/bottom and 

left/right reversed. This function is used to project the image from a 

ceiling-mounted projector.

When this function is set to “On,” the picture is left/right reversed. 

This function is used to project the image from the rear of the   

screen.

This function returns all adjusted values to the factory default 

settings. Press the SELECT button at Reset to display a 

confirmation box. To reset, press the SELECT button at “Yes.”

Move the red frame pointer to the desired 

function and press the SELECT button.

Exit the Screen Size Adjustment Menu.

✔