Glyph gt0510f0-1000 Guia Do Utilizador

Since Glyph GT Key drives come pre-formatted for Macintosh you don’t need to format them on installation. 

If you decide to reformat or partition your drive at a later date, use Disk Utility (supplied with the Mac OS X 

operating system). 

1. Open Disk Utility:

 

-Double click on your internal hard drive mounted on the desktop

 

-Open Applications Folder > Utilities Folder > double click on Disk Utility

2. Select your GT Key drive(s) from the list on the left. The top entry represents the FireWire device and the 

entry underneath it represents the volume associated with that device. Click on the top device which will say 

something like “XXXGB Glyph Technologies”.

3. Click the “Erase” tab on the right side of the screen.

4. Choose the desired volume format from the drop-down list. Glyph recommends the default “Mac OS Ex-

tended (Journaled)”.

5. Click in the “Name” field and type the desired name for the drive. This name will identify the drive on the 

desktop

6. Click the “Install Mac OS 9 Disk Driver” button if you would like your drive to compatible with OS 9.

7. Click the “Erase” button to erase your drive. Your new drive should automatically mount on the desktop as 

a Glyph volume.

Since Glyph GT Key drives come pre-formatted for Macintosh you don’t need to format them on installation. 

If you decide to reformat or partition your drive at a later date, you can use the Erase Disk command in the 

Mac OS 9 operating system. This command will erase all the data on a volume and create a new file system. 

Erase disk will not allow you to re-partition a FireWire drive or create a different volume structure than what 

was previously there. 

1. Select the volume by clicking on it once in the Finder

2. Go to the Special menu and select Erase Disk... The Erase Disk dialog box opens to verify your decision to 

erase the disk.

3. In the Name field, enter the new name for the disk or leave the name as it is.

4. In the Format drop-down menu, choose an Extended volume and click “Erase”.