TallyGenicom la550n Guia Do Utilizador

After switching on, the printer is automatically set to Online mode. 
Only in this mode can it receive data from the computer.

`

MX (a message only; X = 1 to 4): Shows the selected menu 
(Macro); for further information refer to 

`

YYY (a message only; YYY = EPS, IBM, DEC): Shows the active 
emulation of the active interface (parallel or serial); for further in-
formation refer to 

`

Load key (4): If this is displayed above this key, no paper is 
loaded in the printer or the paper is in park position. In this case 
the display switches between Ready and Park Position. Press 
the key to feed paper to the printing position. 

`

Setup key: Sets the printer to Setup mode. 

`

Online key: Sets the printer to Offline mode. Loaded paper will 
be transported to printing position. If the printer is set to Online 
mode by pressing the Online key again, the printer transports the 
paper in tear position.

Only in this mode is it possible to perform step, line, or form feeds 
from the control panel, see 

 (page 34); however, 

data cannot be received. 

`

Park key (1): Clears the paper path with paper loaded and acti-
vates paper path quick selection, see 

`

Key 

 (2): Short keypress: Microstep forward. Long keypress: 

Continuous paper feed. 

`

Key 

 (3): Short keypress: Microstep reverse. Long keypress: 

Continuous paper reverse feed up to the park position. 

`

Load key (4): If no paper is loaded, see above. 
If paper is loaded: Loads paper from the selected paper source; 
the display changes to LF/FF
Short keypress: Line Feed (LF). 
Long keypress: Form Feed (FF). 

`

Setup key: Sets the printer to Setup mode. 

`

Online key: Sets the printer to Online mode. 

Ready

Front1

MX YYY

Load

Online

Setup

2

1

3

4

Pause

Front1

Online

Setup

Park

LF/FF

2

1

3

4