Kurzweil k2600 Manual Suplementar

Quick Song Recording and Playback

The available values for the Channel parameter on this page are 1Ð16 (local and MIDI), 1LÐ16L 
(local only, no MIDI), and 1MÐ16M (MIDI only, no local).

On keyboard models, there are three buttonsÑlabeled Record, Play/Pause, and StopÑbelow 
the mode selection buttons. They control the recording and playback of songs from any mode; 
you donÕt have to be in Song mode to record or play back.

Using these buttons affects the current track of the current songÑthat is, the song and track that 
were selected the last time you were in Song mode. When you record, the recording track and 
recording mode are determined by the current settings in Song mode; likewise for the playback 
mode when youÕre playing a song.

When the sequencer status is STOPPED (neither the Record-button LED nor the Play/Pause-
button LED is lit or ßashing), press Record to put the sequencer in REC READY status. The 
Record-button LED lights (red). Then press Play/Pause to start recording. The Play/Pause- 
button ßashes (green) to indicate the tempo. Any countoff is determined by the current Song-
mode setting for the CountOff parameter. Press Play/Pause or Stop to end recording and go to 
the Save dialog, where you can save the song, or trash it.

When the sequencer status is STOPPED, press Play/Pause to begin playing the current song. 
Press Play/Pause again to pause playback, and again to resume. Press Stop to end playback.

With the K2600R, you canÕt record in this fashion (use Song mode for recording), but you can 
simultaneously press the Up/Down or Left/Right cursor buttons to start and stop playback of 
the current song.

MIDI|Faders:Page1|||||||||||||||||||||||
Chan|:|9|||10||11||12||13||14||15||16|||
Ctl||:|6|||6|||6|||6|||6|||6|||6|||6||||
Value:|50||0|||50||0|||50||0|||50||0||||
||||||||||||||||||||||||||||||||||||||||
||||||

\]||}~||\]||}~||\]||}~||\]||}~||||

|||||||

_|||_|||_|||_|||_|||_|||_|||_||||

Page1||Page2||Page3||Page4|||Send||Done|