Linksys wrk54g Guia Do Utilizador
10
Chapter 6: Configuring the Wireless-G Broadband Router
Overview
Overview
Wireless-G Broadband Router
Chapter 5: Configuring the Wireless-G Broadband Router
Overview
When you first install the Router, you should use the Setup CD-ROM to make sure all settings are correct. If you do
not wish to run the Setup Wizard on the Setup CD-ROM, then you can use the Web-based Utility to configure the
Router. Advanced users can configure the Router’s advanced settings through the Web-based Utility.
not wish to run the Setup Wizard on the Setup CD-ROM, then you can use the Web-based Utility to configure the
Router. Advanced users can configure the Router’s advanced settings through the Web-based Utility.
This chapter will describe each web page in the Utility and each page’s key functions. The utility can be accessed
via your web browser through the use of a computer connected to the Router. For a basic network setup, most
users will use these two screens of the Utility:
via your web browser through the use of a computer connected to the Router. For a basic network setup, most
users will use these two screens of the Utility:
•
Basic Setup. On the Basic Setup screen, enter the settings provided by your ISP.
•
Management. Click the Administration tab and then the Management tab. The Router’s default password is
admin. To secure the Router, change the Password from its default.
admin. To secure the Router, change the Password from its default.
There are six main tabs: Setup, Wireless, Security, Applications & Gaming, Administration, and Status. Additional
tabs will be available after you click one of the main tabs.
tabs will be available after you click one of the main tabs.
To access the Web-based Utility, launch Internet Explorer or Netscape Navigator, and enter the Router’s default IP
address, 192.168.1.1, in the Address field. Then press Enter.
address, 192.168.1.1, in the Address field. Then press Enter.
A password request page will appear. (Windows XP users will see a similar screen.) Leave the User Name field
blank. The first time you open the Web-based Utility, use the default password admin. (You can set a new
password from the Administration tab’s Management screen.) Then click the OK button.
blank. The first time you open the Web-based Utility, use the default password admin. (You can set a new
password from the Administration tab’s Management screen.) Then click the OK button.
HAVE YOU: Enabled TCP/IP on your PCs? PCs
communicate over the network with this
protocol. Refer to “Appendix D: Windows Help”
for more information on TCP/IP.
communicate over the network with this
protocol. Refer to “Appendix D: Windows Help”
for more information on TCP/IP.
NOTE: When installing the Router for the first-
time installation, you should use the Setup
Wizard on the Setup CD-ROM. If you want to
configure advanced settings, use this chapter
to learn about the Web-based Utility.
time installation, you should use the Setup
Wizard on the Setup CD-ROM. If you want to
configure advanced settings, use this chapter
to learn about the Web-based Utility.
Figure 5-1: Password Screen