TallyGenicom 2365 Guia Do Utilizador
The Menu
User guide
70
Selecting interface (Interf.)
Selects the interface. Printer is configured either for parallel, Ether-
net or optional serial connection or in automatic change for the par-
allel or the optional serial interface (Shared).
net or optional serial connection or in automatic change for the par-
allel or the optional serial interface (Shared).
Press Interf. (3) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: Share, Parallel, Serial
Default Setting: Share
Default Setting: Share
Interf.=Share: Printer switches automatically between parallel, eth-
ernet and optional serial interface.
ernet and optional serial interface.
Interf.=Parallel: Printer using parallel interface only.
Interf.=Serial: Printer using serial interface only.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to access the next group of parameters.
(4) to access the next group of parameters.
Interface buffer (Buffer)
Selects the size of the interface buffer.
Press Buffer (2) key.
Use the < (2) or > (3) key to select the desired setting.
Setting Options: 0 – 128 KB
Default Setting: 128 KB
Default Setting: 128 KB
If buffer = 0 KB and the serial interface is selected, or if
the setting “Share” is active, the actual buffer size will
be 512 bytes.
the setting “Share” is active, the actual buffer size will
be 512 bytes.
Confirm the setting by pressing the Set key (1). Press the Next key
(4) to leave the parameter group Interf.. Press the Next key (4)
again to access the next group of parameters.
(4) to leave the parameter group Interf.. Press the Next key (4)
again to access the next group of parameters.
Serial
Interf.
Online
Setup
2
1
3
4
Back
Next
Interf.=
Share*
Online
Setup
Set
<
>
Exit
2
1
3
4
Buffer
Online
Setup
2
1
3
4
Back
Next
Buffer=128 KB
*
Online
Setup
Set
<
>
Exit
2
1
3
4