Sanyo dp42746 Guia De Configuração Rápida

AS

Before starting All Channel Search, point your anten-
na(s) toward the transmitting tower(s). (Log onto
www.antennaweb.org, then type in your street
address and zip code to view a list of your local chan-
nels and the type of antenna that is necessary to receive
them. Click on “View Street Level Map” to see a map
and graph of the transmitting towers in your area.)

The channel search process may take a few minutes.
Please be patient.

If you receive your local chan-
nels from a Satellite or Cable
Box connection, or you intend
only to watch videos or to play
video games on this DTV,
press the EXIT key to skip the
Channel Search process. 

Then press the INPUT key on
the remote control to select
the AV signal source: Video 1,
Video 2, Video 3, or HDMI.
See Quik Step 3 below.

Press the POWER key.

Press the CH

L (channel up) key to start

All Channel Search.

First

Please connect all signals and antennas to
jacks and terminals on the back of the TV.

Then press the Channel UP key.
Press EXIT key to cancel setup.

No input signal sources could be located.

Please check cable or antenna  connections.

Then press the Channel UP key.

Don’t be fooled by the phrase “Available in
High-Definition.” To receive your local
Digital channels in stunning High-Definition,
you  must connect an antenna to the Digital
Antenna In terminal.
Other digital signals can be received from a
set-top box (STB) through the VIDEO 2,
VIDEO 3, and HDMI Jacks (see Quik Step 3
below). The signal makes the difference.

Connect an antenna or your analog cable sys-
tem to the UHF/VHF/CATV terminal to
receive analog channels.

HIGH-DEFINITION TELEVISION

M

Don’t be fooled by the phrase “Available in High-Definition.” To watch
Satellite or Digital Cable HD programs in High-Definition, you must:

1. Subscribe to Satellite or Digital Cable High-Definition service.

2. Connect your Satellite or Cable HD Receiver to the Component or

HDMI input jacks on the DTV.

Crucial Advice for Best Picture 
Composite and  RF output signals
from set-top boxes are Analog. These
jacks are for compatibility to older
analog equipment, such as, a VCR.

1. DO NOT connect your HD

Satellite receiver,  HD Cable Box
receiver, or  DVD player to the
Composite input jacks (VIDEO 1)
on the DTV.

2. DO NOT

connect the RF 

output of a High-Definition
receiver (Satellite or Cable Box)
to either DTV RF input terminal. 

To view the highest resolution
your Digital AV set-top box or
DVD player can reproduce, you
must connect it to the VIDEO 2,
VIDEO 3, or HDMI inputs. 

NOTE: Refer to the owner’s manual for

HDMI connection instructions

.

(most common method)

The Component jacks on this DTV will accept HDTV,  EDTV, or
SDTV video signals, making Component a great choice when con-
necting your DVD player. 

Because there are two sets of component jacks, you have the option of
connecting a second digital device, such as, a Digital Cable Box or
Satellite Receiver.

NOTE: A subscription to Digital Cable service or Satellite service is required for

those connections. The subscription must include  High-Definition program-
ming and you must connect an HD Receiver to your DTV to view HD images.

Simply connect a Component
cable to a set of Green, Blue,
and Red video jacks on the
DTV and to a DVD player, as
shown. (Cable is not supplied.)

Then connect an Audio cable
to the matching set of White
and Red audio jacks, as shown,
and to the DVD player. (Cable
is not supplied.)

Use the INPUT key on the
remote control to select Video 2
or  Video 3. (See Skip Channel
Search Option under Quik Step
2 above.)

(or Satellite receiver, Digital

Cable box, video 
game, etc.)

© 2006 Sanyo Manufacturing Corporation

DTV Back

DTV Back

NOTE: This DTV has two identical
sets of Component AV jacks (VIDEO 2
& VIDEO 3), use either set (or both
sets) when connecting digital AV
equipment.