Sanyo dp55441 Guia Do Utilizador

English

1  

Connect a RGB cable from the monitor output on 
your PC to the RGB connector on the HDTV and 
tighten the screws. (Monitor Cable not supplied).

2  

Insert one end of a Stereo Mini-Audio cable into the 
PC Audio Out jack and the other end into the HDTV 
PC AUDIO INPUT jack. (Stereo Mini-Audio Cable not 
supplied).

HDTV VOLUME 

3  

Select Auto Adjustment from the PC Setup Menu.

To avoid a 

“No Support“ condition, preset your PC’s 

output resolution to a XGA value such as 1024 x 768 
before you disconnect it from your regular monitor.

1  

Use the CURSOR 

▲ and ▼ buttons on the 

remote control to highlight the Auto Adjust 
in the PC menu. Press the OK button to start  
automatically adjust function.

The Clock, Phase, Horizontal Position, and Vertical 
Position are set automatically when Auto Adjustment is 
completely done.

Clock- Adjust the Dot frequency to match the dot 
frequency of your computer.

Phase- Adjust the phase when the picture appears 
flicker or blur.

H-Position- Move the image horizontally.

V-Position- Move the image vertically.

1  

Use the CURSOR 

▲and ▼ buttons on the remote 

control to highlight H-Position, V-Position, Clock 
or Phase. Press the OK button.

2  

Use the CURSOR 

◄ and ► buttons to adjust the

value of setting. Press the MENU button to return.

3  

Press the EXIT button on the remote control to 
exit the current menu.

The Picture settings in the PC input will not affect other 
input settings.