Sanyo ht27546 Guia De Configuração Rápida

AS

Before starting All Channel Search, point your anten-
na(s) toward the transmitting tower(s). (Log onto
www.antennaweb.org, then type in your street
address and zip code to view a list of your local chan-
nels and the type of antenna that is necessary to receive
them. Click on “View Street Level Map” to see a map
and graph of the transmitting towers in your area.)

The channel search process may take a few minutes.
Please be patient.

If you did not connect an
antenna in Item 1, you must
run All Channel Search twice.
Follow the on-screen instruc-
tions. See Item 3 below to
connect a DVD player or sim-
ilar Audio Video (AV) device.

After the second channel
search is complete, you can
use the INPUT key to select
the AV inputs, for monitor use.

Press the POWER key.

Press the CH

L (channel up) key to start

All Channel Search.

Signal quality is the Number One factor affecting picture quality.

That being said, it is important to understand that the signal will repro-
duce differently, depending on how you connect your external equip-
ment to the DTV.

1. DO NOT connect your DVD

player or similar digital AV
device to the Composite
VIDEO2 jacks on the DTV.

2. DO NOT

connect the RF 

output of a Satellite receiver or
Digital Cable box to the RF
input terminal on the DTV
(UHF/VHF/CATV). 

These connections should be used
only with Analog equipment, such
as a VCR. Avoid connecting digi-
tal equipment to these jacks, as
that will reduce the picture quality.

To  display the clearest images
from your DVD player or other
digital AV device, you must con-
nect them to the DTV using the
COMPONENT input jacks. 

(most common method)

The Component jacks on this DTV will accept any video signal resolu-
tion,  making Component a great choice when connecting your DVD
player or similar digital AV device, such as, a Satellite receiver, Digital
Cable Box, or video game.

Simply connect a Component
cable’s Red, Blue, and Green
connectors to the VIDEO2 Red,
Blue, and Green video jacks on
the DTV and to a DVD player,
as shown here. (Cable is not
supplied.)

Then connect an Audio cable’s
White and Red connectors to
the VIDEO2 audio jacks and to
the DVD player. (Cable is not
supplied.)

Use the INPUT key on the
remote control to select Com-
ponent2 as the input source.

NOTE: The Component and Composite

VIDEO2 inputs share the same
audio inputs, therefore, you can
connect only one device at a time to
the VIDEO2 inputs.

First
Please connect all signals
and antennas to jacks and
the terminals on the back.

Then press Channel UP key.

No input signal sources
could be located.

Please check cable or 
antenna  connections.

Then press Channel UP key.

L Again

© 2006 Sanyo Manufacturing Corporation

To  receive your local Digital channels you
must connect an antenna to the Digital
Antenna In terminal on the back of the
DTV. Other digital signals can be received
from a set-top box (STB) through the
Component INPUT2 jacks (Item 3 below).
The signal makes the difference.

To  receive analog channels, connect an
antenna or your analog cable system to the
UHF/VHF/CATV terminal.

DTV Back

DTV

Back

(or Satellite receiver,
Digital Cable box,
video game, etc.)

NOTE

: Subscription 

to Cable or Satellite service is required
for those connections.

M