Lexmark C710 Cartão De Referência Rápida

Move the rear and side guides to properly position the 

guides for the media size. 

Labels and card stock can only be used in the multipurpose

feeder. Transparencies can only be fed from the multipurpose feeder or 
tray 1.

Recommended Lexmark transparencies are P/N 12A5150 

(letter) or P/N 12A5151 (A4).

Paper or 
transparencies

Rear guide

Maximum stack height

Paper face up top 
edge entering printer

Paper face down top 
edge entering printer

Envelope face down 
with flap to the right

Top output bin

Message

Location

202 Paper Jam

Fuser and output rollers

201 Paper Jam

Transfer belt and fuser

250 Paper Jam

Multipurpose feede

r

24x Paper Jam

Paper tray

1 Open the fuser cover, fuser door, and front cover.

2 Remove coating roll.

3 Carefully remove jammed paper.

4 Close the front cover, fuser door, and fuser cover.

Note: Paper jammed in the fuser rollers must be 
removed from the underside of the fuser.

1 Open the front cover.

2 Carefully remove any jammed paper.

3 Close the front cover.

1 Open the front cover.

2 Carefully remove any jammed paper.

3 Close  the  front  cover.

1 Remove the paper tray.

2 Carefully remove any jammed paper.

3 Place the tray inside the printer.

Note: You may have to remove the drawer above the 
paper jam or clear the jam from inside the front cover.

Message

Location

230 Paper Jam

Top duplex assembly

231 Paper Jam

Rear duplex assembly

232 Paper Jam

Duplex unit base and tray

1 Open the top duplex assembly door.

2 Carefully remove jammed paper.

3 Close the top duplex assembly door.

1 Open the rear cover.

2 Carefully remove any jammed paper.

3 Close the rear cover.

1 Completely remove duplex unit inverter tray.

2 Carefully remove jammed paper (check inside 

duplex unit base).

3 Insert duplex unit inverter tray into duplex unit.

© Copyright Lexmark International, Inc. 1999. All rights reserved. 

Printed in U.S.A.

This document is printed on recycled paper. 9/99

E.C. 1C0105

P/N 10E0243