Lexmark W850DN Guia Do Utilizador

Página de 212
Checking the status of supplies
A message appears on the display when a replacement supply item is needed or when maintenance is required.
Checking the status of supplies from the printer control panel
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press the up or down arrow button until  Status/Supplies appears, and
then press  .
3
Press the up or down arrow button until  View supplies appears, and then press  .
The status of each supply appears.
Checking the status of supplies from a network computer
Note: The computer must be connected to the same network as the printer.
1
Type the printer IP address into the address field of your Web browser.
Note: If you do not know the IP address of the printer, print a network setup page and locate the IP address in
the TCP/IP section.
2
Click Device Status. The Device Status page appears, displaying a summary of supply levels.
Ordering supplies
To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies
dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the
place where you purchased the printer.
Note: All life estimates for printer supplies assume printing on letter- or A4-size plain paper.
Part numbers
Part name
Part number
For printer
Toner Cartridge
W850H21G
W850
Photoconductor Kit
W850H22G
W850
Maintenance kit (low voltage)
40X0956
W850
Maintenance kit (high voltage)
40X0957
W850
Maintenance kit (100 volt)
40X 958
W850
Staple Cartridge
25A0013
W850
Ordering a toner cartridge
When 88 Cartridge low appears, order a new cartridge.
When 88 Replace Cartridge appears, you must replace the cartridge.
Maintaining the printer
120
0