Lexmark W850DN Guia Do Utilizador
51 Defective flash detected
Try one or more of the following:
•
Press the up or down arrow button until Continue appears, and then press to clear the message and
continue printing.
continue printing.
•
Cancel the current print job. Press the up or down arrow button until Cancel job appears, and then press
.
52 Not enough free space in flash memory for resources
Try one or more of the following:
•
Press the up or down arrow button until Continue appears, and then press to stop the defragment operation
and continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
and continue printing.
Downloaded fonts and macros not previously stored in flash memory are deleted.
•
Delete fonts, macros, and other data stored in flash memory.
•
Upgrade to a larger capacity flash memory card.
53 Unformatted flash detected
Try one or more of the following:
•
Press the up or down arrow button until Continue appears, and then press to stop the defragment operation
and continue printing.
and continue printing.
•
Format the flash memory. If the error message remains, the flash memory may be defective and require replacing.
54 Serial option <x> error
<x> is the number of the serial option.
Try one or more of the following:
Try one or more of the following:
•
Check that the serial cable is connected correctly and is the proper one for the serial port.
•
Check that the serial interface parameters (protocol, baud, parity, and data bits) are set correctly on the printer
and host computer.
•
Press the up or down arrow button until Continue appears, and then press to continue printing.
•
Turn the printer off and then back on to reset the printer.
54 Network <x> software error
Try one or more of the following:
•
Press the up or down arrow button until Continue appears, and then press to continue printing.
•
Turn the printer off and then back on to reset the printer.
•
Upgrade (flash) the network firmware in the printer or print server.
Troubleshooting
143