Lexmark W850DN Guia Do Utilizador
4
Press the up or down arrow button until Print Fonts appears, and then press .
5
Press the up or down arrow button until appears next to PCL Fonts, PostScript Fonts, or PPDS
Fonts, and then press .
After the font sample list prints, Ready appears.
Fonts, and then press .
After the font sample list prints, Ready appears.
Printing a directory list
A directory list shows the resources stored in flash memory or on the hard disk.
1
Make sure the printer is on and Ready appears.
2
From the printer control panel, press .
3
Press the up or down arrow button until Reports appears, and then press .
4
Press the up or down arrow button until Print Directory appears, and then press .
After the directory list prints, the printer returns to the Ready state.
Printing the print quality test pages
Print the print quality test pages to isolate print quality problems.
1
Turn the printer off.
2
Hold down and the right arrow button while turning the printer on.
3
Release the buttons when the clock appears, and wait for CONFIG MENU to appear.
4
Press the up or down arrow button until Prt Quality Pgs appears, and then press .
The print quality test pages print.
The print quality test pages print.
5
Press the up or down arrow button until Exit Config Menu appears, and then press .
Resetting the Printer appears briefly, followed by a clock, and then Ready appears.
Canceling a print job
Canceling a print job from the printer control panel
If the job is formatting or already printing, and Cancel a job appears on the first line of the display:
1
Press the up or down arrow button until Cancel appears.
A list of jobs appears.
A list of jobs appears.
2
Press the up or down arrow button until appears next to the job you want to cancel, and then press .
Note: Once a print job is sent, to easily cancel a job, press . The Stopped screen appears. Press the up or down
arrow button until Cancel a job appears, and then press .
arrow button until Cancel a job appears, and then press .
Printing
72