Lexmark W850DN Guia Do Utilizador

Off
On
Auto

Temporarily stores jobs on the printer hard disk before printing
Notes:

Off is the factory default setting.

The On setting buffers jobs on the printer hard disk.

The Auto setting buffers print jobs only if the printer is busy processing data

from another input port.

Changing this setting from the printer control panel and then exiting the menus

causes the printer to restart. The menu selection is updated.

Auto
Off
On

Sets the printer to process Macintosh binary PostScript print jobs
Notes:

Auto is the factory default setting.

The Off setting filters print jobs using the standard protocol.

The On setting processes raw binary PostScript print jobs.

ENA Address
ENA Netmask
ENA Gateway

Sets the network address, netmask, or gateway information for an external print

server that is attached to the printer using a USB cable.
Note: This menu item is available only if the printer is attached to an external print

server through the USB port.

Use the following menu to configure the SMTP server.

Specifies SMTP server port information
Note: 25 is the default SMTP gateway port. Range is 1-65536.

5–30

Specifies the amount of time in seconds before the server stops trying

to send the e-mail
Note: 30 seconds is the factory default setting.

Specifies a reply address of up to 128 characters in e-mail sent by the

printer

Disabled
Negotiate
Required

Sets the printer to use SSL for increased security when connecting to the

SMTP server
Notes:

Disabled is the factory default setting for Use SSL.

When the Negotiate setting is used, your SMTP server determines if

SSL will be used.

Understanding printer menus