Kurzweil k2500 Guia Do Utilizador

Página de 93
 
   
 
              FXAlg #1: MiniVerb ¥ FXAlg #2: Dual MiniVerb
 
                                                                                                                                                                                                            
 
Algorithm Reference-3
 
Simplified block diagram of Dual MiniVerb
 
Dual MiniVerb has a full MiniVerb, including Wet/Dry, Pre Delay and Out Gain controls, dedicated to each of the 
left and right channels. The two blocks in the diagram above labeled ÒMiniVerbÓ contain a complete copy of the 
MiniVerb on the previous page. Dual MiniVerb gives you independent reverbs on both channels which has obvious 
benefits for mono material. With stereo material, any panning or image placement can be maintained, even in the 
reverb tails. This is pretty unusual behavior for a reverb, since even real halls will rapidly delocalize acoustic images 
in the reverberance. Since maintaining image placement in the reverberation is so unusual, you will have to 
carefully consider whether it is appropriate for your particular situation. To use Dual MiniVerb to maintain stereo 
signals in this manner, set the reverb parameters for both channels to the same values.  The Dry Pan and Wet Bal 
parameters should be fully left (-100%) for the left MiniVerb and fully right (100%) for the right MiniVerb.
 
Parameters (MiniVerb):
 
PAGE 1
PAGE 2
 
Wet/Dry
0 to 100%wet
Out Gain
Off, -79.0 to 24.0 dB
Rvrb Time
0.5 to 30.0 s, Inf
HF Damping
16 to 25088 Hz
L Pre Dly
0 to 620 ms
R Pre Dly
0 to 620 ms
Room Type
Hall1
Diff Scale
0.00 to 2.00x
Size Scale
0.00 to 4.00x
Density
0.00 to 4.00x
Pan
Pan
MiniVerb
Balance
Balance
L Input
R Input
L Output
R Output
MiniVerb
Dry
Dry
Wet
Wet