Fujifilm S3100 Manual Do Proprietário

23

22

Quality setting

4

F

4

N

Number of recorded
pixels

2272 

× 1704

2272 

× 1704

DPC-16 (16 MB)

8

2

1600 

× 1200

1

`

1280 

× 960

16

33

66

134

268

16

32

66

132

266

532

25

50

101

204

409

818

33

68

137

275

550

1101

640 

× 480

122

247

497

997

1997

3993

DPC-32 (32 MB)

DPC-64 (64 MB)

DPC-128 (128 MB)

DPC-256 (256 MB)

DPC-512 (512 MB)

Press the shutter button down fully. When a Beep
noise is heard, the camera records the image.

●

There is a slight delay between the shutter button being
pressed and the picture being taken. Play back the shot to
check the image.

●

When pressing the shutter button down fully in one motion,
the picture is taken without the AF frame changing.

●

When the camera takes the picture, the indicator lamp lights
orange (shooting disabled). The indicator lamp then turns
green and the next picture can be taken.

●

When taking a picture using the flash, the image may
disappear and go dark as the flash charges. The indicator
lamp then blinks orange.

●

See P.89-90 for information on the warning displays.

When using the LCD monitor to take pictures,
press the “EVF/LCD” button to select the LCD
monitor.

Brace your elbows against your sides and hold the
camera with both hands. Position of your right
thumb so that it is handy for using the zoom.

●

Moving the camera while shooting gives a blurred picture
(camera shake). Use a tripod to avoid camera shake,
particularly for shots in the dark when the selected flash
mode is Suppressed flash.

Use the LCD monitor to frame the shot so that the
subject fills the entire AF (Autofocus) frame.

   

   １６

１６

Ｎ

AF frame

TAKING PICTURES (B AUTO MODE)

●

The image shown on the LCD monitor before the picture is
taken may differ in brightness, color, etc. from the image
actually recorded. Play back the recorded image to check it
(

➡P.26).

◆

◆

The FinePix S3100 / FinePix S3500 uses a high-precision autofocusing mechanism. However, it may
have difficulty focusing on the following:
h Very shiny subjects such as a mirror or car

body

h Subjects photographed through glass
h Subjects that do not reflect well, such as hair

or fur

h Subjects with no substance, such as smoke or

flames

h Dark subjects
h Fast moving subjects
h Subjects with little or no contrast between the

subject and the background (such as white

walls or subjects dressed in the same color as
the background)

h Shots where another high-contrast object (not

the subject) is close to the AF frame and is
either closer or further away than your subject
(such as a shot of someone against a
background with strongly contrasting
elements)

For such subjects use AF/AE lock (

➡P.24).

Lit green

Ready to shoot

Blinking green

AF/AE in progress, camera shake warning or AF warning (ready to shoot)

Blinking green and
orange alternately

Recording to xD-Picture Card (ready to shoot)

Lit orange

Recording to xD-Picture Card (not ready)

Blinking orange

Charging the flash (flash will not fire)

Blinking green
(1-second intervals)

Camera in Power save mode (

➡P.61)

Blinking red

h xD-Picture Card Warnings

No card inserted, card not formatted, incorrect format, card full, xD-Picture Card error

h Lens operation error

✽ Detailed warning messages appear on the screen (➡P.89, 90).

The number of available frames appears on the
screen.

●

See P.38 for information on changing the quality setting.

●

The default quality “

y

” set at shipment is “

4

N”.

■ Standard number of frames per xD-Picture Card

The table below shows the standard number of frames for a new xD-Picture Card formatted on the camera. The larger the
xD-Picture Card capacity, the bigger the difference between the actual number of frames and the number shown here. Also,
the size of an image file varies depending on the subject. So the number of remaining shots may decrease by 2 or may
remain the same. For this reason, the number displayed may not show the actual number of frames.

Ｎ   

Ｎ   １６

１６