Advantek Networks adr-18cu Guia Do Utilizador
ADSL Full-Rated Router 35
6.3 ADSL Configuration
This page allows user to configure ADSL router Annex mode, handshaking protocol, wiring selection
and bit swapping options.
Annex Mode Config: This option includes User Selected which user allows to select Annex mode and
Auto Selected which ADSL router automatically select appropriate Annex mode.
User Selected Annex Mode: This feature enables when user select User Selected mode in Annex
Mode Config. It has Annex A and Annex B two options.
Trellis: Trellis code provides a level of forward error correction to ADSL router. User can either enable
or
Auto Selected which ADSL router automatically select appropriate Annex mode.
User Selected Annex Mode: This feature enables when user select User Selected mode in Annex
Mode Config. It has Annex A and Annex B two options.
Trellis: Trellis code provides a level of forward error correction to ADSL router. User can either enable
or
disable this function.
Handshake Protocol: This feature allows user to choose Autosense-G.dmt first / Autosense-T1.413
first / G.dmt/G.lite/T1.413 / G.dmt / G.lite communication protocols.
Wiring Selection: This field allows the user to enter the wiring selection for the RJ-11. Tip/Rip is the
default for the board without the inner/outer pair relay. This feature allows user to choose from
first / G.dmt/G.lite/T1.413 / G.dmt / G.lite communication protocols.
Wiring Selection: This field allows the user to enter the wiring selection for the RJ-11. Tip/Rip is the
default for the board without the inner/outer pair relay. This feature allows user to choose from
Auto /
Tip/Ring / A/A1 wiring selection.
Bit Swapping: This field allows the user to enable or disable the upstream bit swapping.