Alcatel-Lucent ls 6248 Guia De Configuração Rápida
Introduction
1-8
1
Status LEDs
The LEDs, which are located on the front panel for easy viewing, are shown below
and described in the following table.
and described in the following table.
Figure 1-2. Port LEDs
Figure 1-3. Combo Port LEDs
Table 1-1. Port Status LEDs
Port Status LEDs
LED
Condition
Status
RJ-45 Ports
Non-POE
Non-POE
On Green
A port has established a valid network connection, it is
linked.
Flashing Green
Activity has been detected on the port.
POE
On Amber
A port has established a valid network connection, it is
linked.
Flashing Amber
Activity has been detected on the port.
SFP Ports
On Green
An SFP transceiver port has established a valid 1000 Mbps
network connection. The associated RJ-45 port is disabled.
Off
An SFP transceiver port has no valid link, or the link has
failed. The associated RJ-45 port is enabled.
Flashing Green
An SFP transceiver port has established a valid 1000 Mbps
network connection, and activity has been detected on the
port. The associated RJ-45 port is disabled.
100Base-FX Port LED
On Green
Port has established a valid network connection, it is linked.
Flashing Green
Activity has been detected on the port.
Stacking Ports
Off
Device is a standalone.