Franklin lm-6000sev Guia Do Utilizador
Installing and Replacing Batteries
Your Language Master
SE comes with four AA
batteries. You must install them before starting.
When you replace batteries, use only high-quality
alkaline or nickel cadmium rechargeable batteries. Not
all nickel cadmium batteries fit the Language Master
alkaline or nickel cadmium rechargeable batteries. Not
all nickel cadmium batteries fit the Language Master
SE,
however, so check them carefully when you buy.
NOTE: Replacing the batteries may delete your word
and message lists. To avoid this, we suggest that you
plug in the AC adapter whenever you change
batteries. The AC adapter overrides the batteries, but
it doesn’t recharge them.
and message lists. To avoid this, we suggest that you
plug in the AC adapter whenever you change
batteries. The AC adapter overrides the batteries, but
it doesn’t recharge them.
1. Remove the battery cover.
You’ll find it on the back toward the top.
2. Insert the batteries.
Place the batteries according to the polarity markings.
Adjusting the Contrast and Volume
You can change the screen contrast and speaker volume
of your Language Master
of your Language Master
SE at any time. Simply adjust
the controls on the right side of the unit.
The contrast control is marked with a . The volume
control is marked with a .
control is marked with a .
1. Press
ON/OFF
.
2. Adjust the contrast control until you see the main
prompt.
prompt.
This is the main prompt. It’s where you type words to
check spellings, find definitions and synonyms, and do
other tasks. You can return to the main prompt at any
time by pressing
check spellings, find definitions and synonyms, and do
other tasks. You can return to the main prompt at any
time by pressing
CLEAR
.
3. Adjust the volume control.
4. Press
CLEAR
to test the volume level.
You should hear “Ready” spoken clearly.
Start-up Problem Solvers
What do you do if you don’t hear “Ready” or see
anything on the screen?
anything on the screen?
Check your batteries. Are the pluses positioned
properly?
properly?
Check the volume. Is it turned up sufficiently?
Check your headphones. If they’re plugged in, they
override the main speaker.
override the main speaker.
-7-
-8-
▲