Fujitsu pds4203 Guia Do Utilizador

• When mounting the Plasmavision vertically, make sure that  the power lamp is at the lower right.

• Do not display the same picture (pattern) continuously for a long time. Doing so raises the brightness of the picture and may

cause after-images.

• Looking at the picture continuously for a long time can tire the eyes. View the display from a reasonable distance (about three

times the length of the screen).

∗

If something is wrong with the Plasmavision internally, the built-in protection circuit will cut the power automatically. If so, the

power lamp will blink in red, indicating a malfunction.

• If the power lamp is blinking red, it is warning that something is wrong with the Plasmavision. There is a danger of fire or

electrical shock, so be certain to unplug the power cord and contact your product dealer. (See P44)

• The plasma display panel has been built using extremely precise and sophisticated technologies. More than 99.99% of its

pixels are effective. However, a minute number of pixels are missing or constantly lit.

• Do not install the Plasmavision where there will be interference between it and other AV equipment. (If interference from

electromagnetic waves causes jumbled images, noise or malfunctioning of the infrared remote control, change the installation

location.)

• When the display is installed vertically, only still images appears.

Wall mounting 
(vertical usage)

15 cm

10 cm

5 cm

10 cm

10 cm

Upper

Lower

Power lamp

Left

Right

Wall