Sony KDL-60EX720 Manual Suplementar

− −

Refer to the Instructions for SU-WL500.

 

Remove the screws indicated by the arrow marks   on the TV.
Table-Top Stand attached to TV.

Only For KDL-40/32EX521 (Mexico models)

Only For KDL-60NX72

*, 60EX72*

*  In the actual model names, the “” indicates numbers and/or characters specific to each model.

✍

•  Do not remove the Table-Top Stand for any reason other than to install corresponding accessories on 

the TV.

•  When removing the Table-Top Stand from the TV, lay the TV face down on a stable work surface that is 

larger than the TV.

•  To prevent damaging the surface of the TV, make sure to place a soft cloth on the work surface.

•  When lifting or moving the TV, keep a soft cloth underneath to prevent damage.

•  The number and position of the screws on the rear of the TV differs, depending on the model of TV; be 

sure to read the operating instructions of your TV.

•  Be sure to remove the joint when the Table-Top Stand is not attached to the TV.

•  Be sure the TV is in a vertical position before turning it on. The TV set must not be powered on with 

the LCD panel face down to avoid uneven picture uniformity.

•  If pressure or shock is applied to the surface of the TV, the TV may break or become damaged.

•  Lay the TV face down on a stable and level surface with the Table-Top Stand hanging over the edge of 

the surface. Having the TV face and the base of the Table-Top Stand on the same level surface will create 

an unstable working condition and can damage the TV.

•  When detaching the Table-Top Stand from the TV, hold the Table-Top Stand securely with both hands.