AvMap ekp iii c Manual Do Utilizador
other bathymetric areas are white. So, if the reference depth is 0, all areas are white, if it is
99.999 all areas are gray. The default setting is 33 FT.
NOTE FOR THE EKP-III C
The Depth Areas shown on the screen are filled with three different shades of blue. Selecting the Min and Max val-
ues in the range of Depth Limit, there are three areas: [0, Min] colored with dark blue, [Min, Max] colored in
blue and [Max, 15000] colored in light blue. The default setting is 6 Ft for Depth Areas Limit 1 and 50 Ft for
Depth Areas Limit 2.
Navigational Aids:
ON/OFF. The default setting is On.
Attention Areas:
ON/OFF/CONTOUR. The default setting is Contour.
Tracks & Routes:
ON/OFF. The default setting is On.
3.5.8.5 Other Settings
User Points:
OFF/ICON/ICON LABEL. The default setting is Icon/Label.
Objects Overlap:
ON/OFF. The default setting is On. When more then one object
is at the same position, the selection of On allows the screen to
draw the objects overlapping.
LAT/LON Grid:
ON/OFF. The default setting is Off.
3.5.9 SELECTIVE DISPLAY SETTINGS
In addition to the above Moving Map Settings the Selective Display feature allows you to further
customize the display by selecting the chart scale level at which the category of data will begin
displaying on the map. This feature is extremely useful in decluttering the screen in populated
areas or at times when you want to focus on a single category of data, i.e. medium airports only.
>‘MENU’ + “SELECTIVE DISPLAY...” + ‘ENTER’
Scroll through the cells using the cursor keys. To select the desired scale you would like
the map to begin displaying data for the category, place the cursor within the cell and press
‘ENTER’. (The map scale for the cell is displayed at the top right.) Any box with an “X” indi-
cates the feature is not available at that chart scale.
All data for that category will begin to display at that chart scale checked and all scales below.
EKP III USER MANUAL
39