Humminbird 777c2 Guia De Utilização

Página de 42
6
3
What’s On the Display
The 700 Series™ Fishing System can display a variety of useful information about the area   
under and adjacent to your boat, including the following items:
Depth - water depth; can be set to alarm when
the water becomes too shallow.
Temperature - water
Timer - Elapsed time
with Temp/Speed
Distance - Distance
traveled with
Average Speed - Average
speed reading with
Second Sonar Return - when the sonar signal
bounces between the bottom and the surface of the
water and back again. Use the appearance of the
second return to determine bottom hardness. Hard
bottoms will show a strong second return, while soft
bottoms will show a very weak one or none at all. 
Speed - if a Temp/Speed
accessory or GPS Receiver is attached, the
FishFinder can display the speed of the boat, and
can keep a Triplog of nautical or statute miles
RTS® (Real Time Sonar) Window
Structure - where fish may be hiding. 
Thermoclines - layers of water with different
temperatures that appear at different depths
and different times of the year.  A thermocline
typically appears as a continuous band of many
colors moving across the display at the same
depth. 
83 kHz Blue Fish Symbol
Bait Ball
Fish - the FishFinder displays fish as arches
and/or fish icons, and can be set to alarm when
a fish of a certain size is detected. When a
target is detected, a Fish ID+
TM
symbol appears
on the display with the depth displayed above
it. The size of the symbol indicates the intensity
of the sonar return. The unit will clearly show
schools of Bait Fish as "clouds" of different
shapes and sizes, depending on the number of
fish and boat speed.
Low Sonar Intensity Return
High Sonar Intensity Return
NOTE: Entries in this view that list (with Temp/Speed or GPS Receiver) are available if either                     device is connected to the 700 Series™ Fishing System.  If both devices are connected, then
only the information from the GPS receiver will be displayed on the view.
200 kHz Orange Fish Symbol
Cursor - available in Freeze Frame and can be
positioned in the Sonar View to provide depth of a
sonar return and bottom
Cursor Dialog Box - indicates cursor depth on the
display and the depth of the bottom directly below
the cursor. The Latitude and Longitude of the cursor
position, the distance to travel to the cursor position
and the bearing to the cursor position is shown with a
GPSreceiver.  A waypoint can be marked at the cursor
position for later retrieval and use with a GPS receiver.
Do Not print this page
this is not a mistake, it’s for the
printing process
531474-1_A_777c2_English.qxd  11/3/2005  8:01 PM  Page 12