RCA t20062bc Guia Do Utilizador
17
Using the Playback Features
Playing a Tape
Zero Search
This feature allows you to quickly return to a time counter reading
of 0:00:00. This is especially convenient when you want to watch a
segment of the tape several times.
of 0:00:00. This is especially convenient when you want to watch a
segment of the tape several times.
1
. Insert the pre-recorded tape. Press STOP.
2
. Press DISPLAY twice to display only the time counter.
3
. Use PLAY, FF, or REW to locate the start of the segment you
want to repeat.
4
. Press CLEAR to reset the time counter to 0:00:00.
5
. Continue playing the tape and press STOP when you reach the
end of the segment you want to repeat.
6
. Press SKIP/SEARCH twice to display the ZERO SEARCH screen.
The current time counter is displayed.
7
. Press REW to return to 0:00:00. The time counter is displayed in
the upper right corner of the screen during the search. If the
current time counter has a minus in front of it, press FF.
current time counter has a minus in front of it, press FF.
ZERO SEARCH
Current tape counter is
0:12:34
Press REW to go to
0:00:00
Press SEARCH to exit
ZERO SEARCH
Current tape counter is
-0:12:34
Press FF to go to
0:00:00
Press SEARCH to exit
Blank Search
The TV/VCR will search for blank portions of the tape that are more
than six seconds in length.
than six seconds in length.
1
. Insert the pre-recorded tape and press STOP.
2
. Press SKIP/SEARCH three times to display the BLANK SEARCH
screen.
3
. Press FF to begin searching for a segment of at least six seconds of
blank tape.
If a blank area is not found, the message Search completed-end
of tape
of tape
appears.
4
. Press STOP to stop BLANK SEARCH.
BLANK SEARCH
Press FF to begin
searching for blank
section of tape.
searching for blank
section of tape.
Press SEARCH to exit