RCA t20062bc Guia Do Utilizador

Sometimes problems can be easily solved by checking a few basic things.  
Check below before you call for help or take your TV/VCR to an Authorized
VCR Servicenter.

• Plug TV/VCR into an operating outlet.
• Check connections.

• Aim remote at TV/VCR’s remote sensor with no objects between them.
• Change batteries.
• Make sure that program guard is turned off.  (See page 10.)

• Switch to an active channel.
• Check antenna connections.  
• Check video adjustments. (See page 8.)
• Make sure the line input is not selected.  

• Turn up the volume to increase sound.
• Sound has been muted. Press MUTE on remote or VOL up.

• Check tape — it may be worn out or of poor quality.  Try another tape.
• Some snow/streaks are normal during search, pause, frame advance, and

slow-motion playback. 

• Press one of the TRACKING buttons on the remote or CH up or down on the

TV/VCR to move the streaks up or down and out of the picture.

• No cassette in TV/VCR.
• Eject and re-insert cassette.
• Broken tape — try another cassette.
• Safety tab removed from cassette — TV/VCR will not record.
• Make sure that program guard is turned off. (See page 10.)

• Insert cassette with window facing up and safety tab facing out.
• To remove cassette, TV/VCR must be connected to working outlet.
• Turn POWER off and then on before trying to insert or remove cassette.

• Make sure there is a tape in the TV/VCR.
• Press DISPLAY on remote to display time counter on screen. (See page 14.)
• The time counter does not advance during unrecorded portions of tape.

When an unrecorded segment of tape is encountered, the time counter will
hold its count until recorded material is detected again.

• A minus (–) will appear in front of the time if you rewind the tape farther

back than a counter reading of 0:00:00.

• Tape already rewound. 
• Make sure that program guard is turned off.  (See page 10.)

• Program entered incorrectly (wrong channel or times).
• Cable box was not turned on at time recording was to begin.
• Power interruption.  TIMER indicator flashes on front of TV/VCR.
• Check to see if time and date are correct — including AM/PM.
• Program exceeded tape’s length or tape was not rewound beforehand.
• No tape in TV/VCR, or cassette ejected if safety tab broken off.
• Make sure that program guard is turned off.  (See page 10.)