RCA t20062bc Guia Do Utilizador
POWER Button
3
Setting Up the TV/VCR
Startup
continued on next page
3. Connect antenna or cable-TV system.
Connect a home antenna or a cable-TV system. Details on pages 25-27.
4. Place the TV/VCR where you want to operate it.
Place the TV/VCR in a location where it is safe to operate.
CAUTION: If you choose to use a stand with your TV/VCR, take
precautions that the stand or other furniture the TV/VCR is placed
on is properly located and of adequate size and strength to prevent
the TV/VCR from accidentally being pulled off, pushed off, or
tipped over. This could cause damage to the TV/VCR and/or
personal injury.
precautions that the stand or other furniture the TV/VCR is placed
on is properly located and of adequate size and strength to prevent
the TV/VCR from accidentally being pulled off, pushed off, or
tipped over. This could cause damage to the TV/VCR and/or
personal injury.
5. Plug in the TV/VCR.
Plug the power cord into the wall outlet, matching the wide blade of
the plug with the wide slot in the outlet. Be sure to insert the plug
completely.
the plug with the wide slot in the outlet. Be sure to insert the plug
completely.
6. Turn on the TV/VCR.
Press POWER on the TV/VCR or TV or VCR on the remote.
The first time you turn on the TV/VCR after taking it out of the
carton, the TV/VCR will display the AUTOMATIC CLOCK SET
menu shown below. However, if the TV/VCR has been plugged in
and unplugged or after a power interruption, the following message
will appear: The TV/VCR is now setting the clock. This may take
several minutes.
carton, the TV/VCR will display the AUTOMATIC CLOCK SET
menu shown below. However, if the TV/VCR has been plugged in
and unplugged or after a power interruption, the following message
will appear: The TV/VCR is now setting the clock. This may take
several minutes.