Intellinet 519021 Guia Do Utilizador
Modularized 24+2G Switch
25
2-5-7-2. 802.1Q VLAN
Use this page to create tag-based VLANs, and enable or disable GVRP
protocol. There are 256 VLAN groups provided in the Switch. Enable
802.1Q VLAN, all ports on the Switch belong to a default VLAN. Its VID is
1. The default VLAN cannot be deleted.
protocol. There are 256 VLAN groups provided in the Switch. Enable
802.1Q VLAN, all ports on the Switch belong to a default VLAN. Its VID is
1. The default VLAN cannot be deleted.
GVRP (GARP [Generic Attribute Registration Protocol] VLAN
Registration Protocol) GVRP allows automatic VLAN configuration
between the Switch and nodes. If the Switch is connected to a device with
GVRP enabled, you can send a GVRP request using the VID of a VLAN
defined on the Switch. The Switch will automatically add that device to the
existing VLAN.
Modularized 24+2G Switch
26
Basic
Create a VLAN and add tagged member ports to it.
Create a VLAN and add tagged member ports to it.
The above screen is the Main Tag-based VLAN page
1. From the main menu, click administrator VLAN configuration,
click Add then you will see the page as follow.
2. Type a name for the new VLAN.
3. Type a VID number (between 2-4094). The default is 1 (In total,
3. Type a VID number (between 2-4094). The default is 1 (In total,
there are 255 VLANs that can be configured).
4. Choose the protocol type. If you are not applying protocol VLAN,
you must set the value to “NONE”. You can’t set a port to join
more than one VLANs/VIDs with a same protocol.
more than one VLANs/VIDs with a same protocol.
5. From the Available ports box, select ports to add to the switch
and click “Add >>”. If the trunk groups exist, you can see
displayed as: TRK1, TRK2, …, …, and you can configure it to bet
a member of the VLAN or not.
displayed as: TRK1, TRK2, …, …, and you can configure it to bet
a member of the VLAN or not.
6. Click Next. Then you can view the page as follow.