Printronix SL4M Manual Do Utilizador
Status Messages
207
TESTING HARDWARE
PLEASE WAIT
PLEASE WAIT
Yes
Normal power-up
message. Printer is
running its initialization
routine.
message. Printer is
running its initialization
routine.
No action required.
THE
↵
KEY IS
LOCKED
Yes
A momentary status
message that appears
when an attempt is
made to change a
menu option or perform
a diagnostic print test.
By default, the
message that appears
when an attempt is
made to change a
menu option or perform
a diagnostic print test.
By default, the
↵
(Enter) key is locked
when the printer
powers on.
powers on.
1.
Unlock the Enter
key by pressing
DOWN +
key by pressing
DOWN +
↵
at the
same time. (This
is the factory
default key
combination.)
is the factory
default key
combination.)
2.
A different unlock
key combination
will be in affect if
the Set Lock Key
option in the
Printer Setup
menu was used.
key combination
will be in affect if
the Set Lock Key
option in the
Printer Setup
menu was used.
THE
↵
KEY IS
UNLOCKED
Yes
A momentary status
message that appears
when the
message that appears
when the
↵
(Enter) key
is unlocked, permitting
configuration
parameters to be
changed.
configuration
parameters to be
changed.
1.
No action is
necessary if you
want the
necessary if you
want the
↵
key
unlocked.
2.
Press the DOWN
+
+
↵
keyat the
same time if you
want to lock the
want to lock the
↵
key.
To Stop Press
↵
N/A
Normal message when
a test print pattern that
will run continuously is
printing.
a test print pattern that
will run continuously is
printing.
Press the
↵
(Enter)
key to stop printing
the test pattern.
the test pattern.
Table 15. Status Messages
Displayed Message
Can User
Correct?
Explanation
Solution